Concrete surfaces spread over a wide area require powerful, fast gum remover machines. A commercial gum removing machine eliminates thousands of wads per day of discarded chewing gum from buildings, walkways, benches, seating areas, restrooms, retail stores, and other commercial and public spaces. The speed of a gum eliminating machine is advantageous for commercial building owners as well as contractors. Cleaning staff receive the benefits of fast, effective cleaning while contractors make money removing gum.
Gum remover machines for concrete surfaces have several features that ordinary steam cleaners and chemicals lack. Poor quality gum remover chemicals are corrosive and often toxic. A gum remover machine uses dry steam, which is neither corrosive nor a health hazard. Second, gum remover chemicals cannot be used over a wide area due to cost. Dry vapor generated by a gum removing machine has no such limitations. A chewing gum remover machine does not damage the surface while a chemical may harm the surface to which gum adheres. Finally, a gum removing machine with an attached vacuum does not require manual handling of gum, while using a chewing gum removing chemical requires the use of manual scraping tools. While chemicals are not often required for removing gum, it is recommended to use green cleaning chemicals if needed.
Stainless Steel Parts
There are also many points of differences between a chewing gum remover and an ordinary steam cleaner. A steam cleaner designed solely for limited commercial and home use is a poor investment. It does not have the design, quality, and features required for fast, powerful chewing gum removal. For example, a home use machine has aluminum boilers and heating elements. This is good enough when your cleaning requirements are limited to removing small dirt stains inside the home. However, a gum remover business has different, more intense requirements. Tough, hardened chewing gum removal from large areas like parking garages and parks require the use of special chewing gum removing machines. These machines should have stainless steel boilers, because stainless steel can stand higher temperature and pressure levels when compared to aluminum. Stainless steel is also more corrosion resistant, which is important, keeping in mind the chemicals, dirt, and detergents that come into contact with the machine parts on a daily basis.
Constant Pressure
Maintaining consistent pressure levels is difficult for low-end machines. Once water level inside boilers decrease, the steam generation capacity reduces, and the pressure and temperature levels go down. In a home-use machine, the operating time for a steam cleaner before it is required to be refilled is barely twenty minutes. Commercial steam cleaners often have a constant refill feature. It allows the operator to keep the boiler full throughout operation, maintaining a consistent pressure level and reducing the need to stop work frequently. A gum remover business can significantly improve productivity by switching to a machine that has this feature.
Choose steam cleaners for gum removing with care, because a chewing gum remover machine has many applications other than gum removal. These include disinfecting bathrooms, kitchens, and other spaces within commercial areas, as well as removing germs from surfaces as varied as tile, concrete, ceramic, metal, bedding, glass, wood, linoleum, and more. Look for machines with specialized anti-bacterial technologies for this purpose.
Daimer Industries is a leading supplier of commercial gum remover. Daimer provides a complete range of chewing gum remover machines including pressure washer, gum remover and also about gum removal bussiness .
No comments:
Post a Comment